KMS Auto Net® Activator 2022 Official Website

KMSAuto Net 2022- Activator Windows 7, 8, 8.1, 10 and Office 2010-2016

This program is useful for the activation of various software products, including the operating system Windows. The application is useful to any user as it can save a lot of money.

KMSAuto Net v1.4.8 (Updated): what is this program?


KMSAuto Net works by the following principle: on your PC a virtual server is created and substituted as a real developer site, through which the software is activated. When the activation ends, this virtual server is deleted. At the request of the user, you can create an automatic re-activation, which will not allow such a “fly” when upgrading the software or OS.


kmsauto v1.4.8

Activation Proof (Windows)Windows 10 activation proof with kmsautonet

Activation Proof (Office)

Office activation proof with kmsautonet


Advantages of KMSAuto Net

This version of  KMS Auto is able to activate not only Microsoft Windows, but any version of Office, beginning in 2010 and ending in 2016. Contrary to popular belief, this application is completely legal. After all, it was created specifically for the activation of Microsoft’s corporate software segment.

Consider the merits of KMS activator Ultimate:

  • high speed of work;
  • user-friendly interface (how to use the program is understandable from the first minutes);
  • there is a good reference system;
  • there is the possibility of installing a product key;
  • many additional useful tools.

System requirements

The new version of KMSAuto in english works without failures, for correct functioning you need the following hardware:

  • operating system Windows Vista, Windows 7, Windows 8, Windows 10 Maximum
  • installed package. NET Framework
  • Administrator privileges
  • 5 MB of free hard disk space

These are the system requirements from Ratiborus (developer KMSAuto and KMSAuto mini).

What KMSAuto Net can do

Let’s look at the modes of operation that can be used in the program. You can find out about them in detail on the official KMSAuto website. The first and most common mode in the CCM Auto No it’s automatic. When you use it, the application itself chooses the best way to activate and applies it.

The Hacktool program or a hacking tool will remember the activation algorithm and, if it is successful, next time it will apply it by default. There is also a manual setting (NoAuto). Its use is recommended only for experienced users or administrators of operating systems, an unprepared person is able at best not to be able to activate the software, and at worst do him harm.

Another mode is Hook. In this case, the original program file is replaced with a modified one, and when activation occurs, the software is returned to the site. In new versions of the application, the file is no longer replaced, the whole process is in RAM.

The WinDivert mode installs a special driver into the operating system, through which the connection to the KMS server is made, through which the product is activated.

There is another mode called TAP. In the operating system, a special interface is installed, through which activation is carried out. In total there are two TAP-adapters (drivers) in the program, if one of them is already installed, then, to avoid affecting it, the program will install the other and will work through it.

KMSAuto can be customized. First of all, you can switch the mode, and during the program several tabs appear in the program, these are: “Main window”, “System” and “About the program”.

The main window – how to activate

How to Activate Microsoft Product with KMSAuto Net 1.4.8 ?

  • Install KMSAuto Net 1.4.8 on your PC.
  • Disable your Anti-malware utility. Some Antiviruses may ‘flag’ the program as potential malware.
  • Turn off your Internet Connection.
  • Open Activator with administrative rights.
  • Choose Microsoft or Windows from the main menu.
  • Now you’ll have to choose your current MS Office version.
  • Click ‘Activate’.
  • Wait for the process to finish.
  • You may need to restart your machine for the changes to take effect.
  •  kmsauto net v1.4.8 proof

There are 2 big buttons “Activation” and “Information”. If we press the first, we have to choose what to activate, Windows or Office. When you press the “Information” button in the lower half of the window, information about the software activation status is displayed.

Manual mode

If for some reason the automatic method did not work, you can activate it manually.

  1. To do this, switch to the ” System ” tab .
  2. Start the installation or reinstall the KMS-Service.
  3. After that, in the “ Installing GVLK key ” section, install the key.
  4. In the Scheduler, create a task so that the system will re-activate itself every 10 days, if necessary.

Work with the command line

You can also activate via the command line.

  1. Run the command prompt (cmd), be sure to do this as an administrator, otherwise the activation will not be performed – in Windows 10, right-click on the Start button and select “Windows PowerShell (administrator) from the context menu. Or run the Task Manager. and create a new task.
  2. First you need to delete the old keys, if any. To do this, type the command in the console – slmgr.vbs -upk
  3. To install a new command is needed – slmgr / ipk (key). For example;

slmgr / ipk W269U-JFGWX-Y5C9B-4J8V9-T87GX

Copy the command in the usual way in the command line will not work. To paste any text into the command line, use the hotkeys: Ctrl + C (copy), Ctrl + V (paste). Do not forget about spaces and short hyphens (-).

You can check the license status information in the system properties window.

Team tails – slmgr.

  • / Ipk – Change the product key.
  • / Upk — Deletes a license record, when errors occur, to reactivate (delete key).
  • / Ato – Automatic activation of Windows.
  • / dli – Displays license information.
  • / Dlv – Displays detailed license information.
  • / Xpr – Check the validity period and license status.
  • / Cpky – Remove license information from the registry.
  • / ILC – Install licenses.
  • / rearm – Extension of the activation of the trial version of Windows for 30 days

After each command, press Enter.

Additional utilities

The program has built-in additional utilities for convenient operation.

  • MSActBask Up – saving and restoring activation when reinstalling Windows.
  • Work with services – access to the services of the Windows system, disabling or enabling certain services for successful activation.
  • Task Scheduler – create and import tasks, configure the log of all tasks.
  • Account Settings – here you can add a system user, change the name, password.
  • Viewing Windows events – here you can find out why this or that error is caused, which occurred during activation.
  • Reset Negliding System status – delete key information.
  • Show or hide updates – a utility for diagnosing and preventing computer problems.
  • Checking the integrity of system files – log file.
  • Determine ePID and Hwid KMS-Service (fine tuning)
  • Task management in the scheduler – enable or disable tasks to collect information and provide it to Microsoft Corp.
  • Change edition of Windows.

To perform the conversion of Windows 8 Enterprise to Windows 8 Pro, for example, you will need to restart the computer and start the installation in the update mode. Available versions for changing editions:

  • Core (base).
  • Core Single Language (basic for one language)
  • Professional (professional)
  • ProfessionalWMC (Professional with Windows Media Center)
  • Enterprise (corporate)

How to view license status

  • Open the Start menu .
  • Switch to the ” Applications ” tab .
  • Locate this computer in the list and right click on it.
  • In the bottom panel, select ” Properties .”
  • In the system properties window that opens, the status of the license is below.

You can also see the details of the license through the command line. Run it as an administrator and enter the command – slmgr.vbs / Dlv

The register is not important, you can write with a small letter, and with a large one. But after vds there must be a space.


Error codes

Sometimes when you try to activate the system or Office, various kinds of errors appear.

0xc004f074 – an error means that the key entered into the system, for some reason, was not confirmed by the remote server. Occurs when upgrading to Windows 10. And also when working or running third-party software. For server operating systems, this is an incompatibility between the KMS client and the Host computer.

  • To eliminate the cause, check the validity of the entered values.
  • Wait a while and try again. (sometimes due to heavy server load).
  • Contact support.

0xc004f050 – occurs when you cleanly reinstall the OS on a computer with formatting the system disk. All information about licenses is erased from the disk. Actually for versions Windows 7/8 / 8,1. When you try to enter a reusable key. In Windows 10, the key is bound to the hardware permanently and this error does not occur.

  • Check the correctness of the entered key values ​​when activated.
  • Contact customer support.
  • If there is no key, activate the OS using KMS Auto.

0x8007007b – Occurs when the network settings are incorrect. When trying to activate the system without an internet connection. When you enter the key of another edition. For example: if you activate Windows 10 Home, the key to Windows 10 Professional.

0x8007232b – DNS name does not exist. Failed to connect to a key management node (KMS). In this case, you need to contact support or try to activate the system via the command line manually, using the multiple activation key (MAC).

0x803f7001 – When upgrading to Windows 10, when the system did not detect a valid license. Occurs when trying to upgrade the OS to the “ten” from the pirated “seven”.

  • When replacing or repairing components (the system believes that Windows is running on new hardware).
  • Invalid product key values ​​- hyphens (-) are replaced with long dashes (-).
  • Problems with transferring data to a remote server.

0x803fa067 – Installation does not have a valid digital license. Occurs when trying to upgrade a non-licensed Windows 7 or 8 to the “dozens”.

0xc004f012 – found on Windows 10. It means that the licensing suppository is missing or damaged.

  • Sometimes occurs when first turned on.
  • With the next major update.

0x8007000d – When trying to access the “Update Center” file on a disk that is missing or damaged. Missing or not actual driver versions on the computer. Found on Windows 10.

0xc004f014 – At the established corporate “seven” or 8 / 8,1 when trying to upgrade to the “ten” for free. Corporate OS versions are not subject to free upgrade).

0xc004c060 – use an invalid product key.

Antivirus and Kms Activator

Antivirus software is often taken by KMSAuto as a malicious utility. If you use the file downloaded from our site, we guarantee the absence of viruses and trojans in it.

To easily use the activator for Windows and Office, you need to add it to the list of exceptions if you have Kaspersky Anti-Virus or Comodo. Other antiviruses may call this function differently.

False actuation of the antivirus is due to the fact that the activator contains complex utilities that modify the system files of the Windows OS.

If you use the built-in antivirus in Windows then follow our instructions below.

      1. Open the “Windows Defender Security Center”.

     2. Go to “Protection against viruses and threats.”

3. Go to “Options for protection against viruses and other threats.”

     4. Disable Real-time Protection.

The procedure for adding a KMS to to Windows 10 Defender exceptions:

  1. Open the Defender.
  2. Select “Options” in the bottom left corner.
  3. In the “Virus and Threat Protection Notifications” section, select “Virus and Threat Protection Settings“.
  4. Scroll down the list and in the “Exceptions” section, select “Add or remove exceptions.”
  5. Click on the plus sign – “Add an exception”.
  6. Select File, Folder, File Type, or Process.
  7. In the opened explorer, find the required file or folder, and click “Open”. KMS avto will be added to the exceptions and the antivirus will no longer identify it as a threat.
  8. Or disable for some time the antivirus, completely (not recommended).
  9. The order of adding a program to exceptions or shutdowns varies for different antiviruses. For each specific antivirus information can be found on the network.

How to delete and whether to delete?

The program itself does not require removal, since it is not installed as a stationary utility or application. It is easy enough to run, it is portable (except for the KMSAuto Helper version, which runs in the background). Since antiviruses define it as malicious or potentially unwanted software, it is advisable to delete the file itself with the .exe extension. When you first scan the antivirus will detect it as a threat.

KMS-Service is not worth deleting. The program will activate the system with a specified frequency. Otherwise, during the next security update (KB971033), the current activation may fail when the key fails validation on a real KMS. On Windows 7/8 / 8.1, such updates come only once a year. On the “top ten” with every large-scale update (every half year). Periodic confirmation of activation occurs unnoticed by the user.


Here you can configure the activator program, for example, install a KMS server, select one of the operating modes, create a task in the scheduler, install the GVLK-key or select the language of the interface.

About the program

Here everything is standard, we see information about the KMSAuto lite program. But there is one nuance – the inclusion of a professional regime. For this purpose, the “Professional Mode” button is here.

After clicking it, several new tabs appear, namely: “Settings”, “Advanced” and “Utilities”.


Here you can configure the removal of the IP address of KMS, turn off the sounds of the program or its splash screen, disable the addition of the Windows key and click the button “I have few settings !!!”.

What is behind this button? After pressing it, an additional menu appears, in which we can configure in more detail the parameters -Pwin, -PO14, -PO15 and -PO16.


There was information about the license for Windows and Office, as well as the button for saving the activation.


In this section, you can set your own GVLK-key, administrator services, scheduler, accounts, events and reset the “invisible system” settings. You can also change the version of Windows and show its updates.

There is also a button “Other utilities”, which opens an additional window with the ability to verify the integrity of files, the definition of ePID and Hwid KMS-Service.

Download KMSAuto Net for all Windows and Office (2010-2016) Versions